XRAY - Model racing cars
http://forum.teamxray.com/

XB4 problems
http://forum.teamxray.com/viewtopic.php?f=101&t=19573
Page 1 of 1

Author:  Garybigfootobrien [ Sun Aug 20, 2017 21:30:55 ]
Post subject:  XB4 problems

New dealer here and i have sold a few of the 4wd kits.

2 have had incorrect front wheels in them. They came with 14mm hex wheels instead of 12mm hex wheels. Customer did not notice this untill tires were glued onto the wheels and mounted on the car.

One was built friday and raced on saturday. After 2 battery packs, the front ring and pinion gear failed. Possibly not heat treated?

Anyone else experience these problems? Thanks.

Author:  jsrracing [ Mon Aug 21, 2017 00:47:03 ]
Post subject:  Re: XB4 problems

hey bigfoot it was the rear that had the 14mm hex and I will try to post some pic of the front ring and pinion . car had 10000 in front and rear and slipper was half turn so it would not ride the bearing and assembly was correct . I was on highbite clay running dirtwebs using ty setup and a 10.5 motor. pretty big letdown for first run out with buggy .

Author:  jsrracing [ Thu Aug 24, 2017 19:37:44 ]
Post subject:  Re: XB4 problems

xray America sent warranty diff and sent me 14mm hubs , got it in two days and took 2nd place on wed . thanks X-ray and big foot for the amazing turn time

Page 1 of 1 All times are UTC + 2 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/