XRAY - Model racing cars

It is currently Wed Sep 18, 2019 07:25:15

All times are UTC + 2 hours




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: Erratic Servo! HELP!
PostPosted: Mon Oct 11, 2004 04:07:43 
Offline

Joined: Mon Oct 11, 2004 04:06:40
Posts: 6
Hello everyone,
I finished setting up my M18 yesterday. I am using the Hitec 81MG servo, Novak SPY esc, Novak XXL receiver and the transmitter from my Losi Mini-T. The Hitec servo has been acting crazy. The servo won't center, moves back and forth on its own and cannot be trimmed. I don't think it's an interference problem. Is there an issue with this servo and the XXL receiver?
HELP!!
Thanks,
Matt


Top
 Profile  
 
 Post subject:
PostPosted: Mon Oct 11, 2004 09:22:17 
Offline

Joined: Wed Sep 29, 2004 04:10:51
Posts: 10
Location: Canada
my 81MG has same problem, i used two of it, i put 1/12 servo on my M18, 9602, the central point is very good, high speed


Top
 Profile  
 
 Post subject:
PostPosted: Tue Oct 12, 2004 09:03:09 
Offline

Joined: Mon Sep 13, 2004 15:23:33
Posts: 29
Location: UK
I had the same problem when trying a 81MG with the KO 301F receiver.

I changed to the Futaba micro servo -S3102 which fits perfectly and works without problem.

Cant say for sure it will work with the XXL receiver but have heard many people have had problems with this 81MG servo.


Top
 Profile  
 
 Post subject:
PostPosted: Tue Oct 12, 2004 12:16:49 
Offline

Joined: Mon Oct 11, 2004 04:06:40
Posts: 6
Thanks for the information.
I think I am just going to dump the Hitec servos and try the Futaba.
Thanks again for the help.
Matt


Top
 Profile  
 
 Post subject: Re:
PostPosted: Fri Jul 12, 2019 14:47:37 
Offline

Joined: Fri Jul 12, 2019 14:42:25
Posts: 4
mpetrich wrote:
Thanks for the information.
I think I am just going to dump the Hitec servos and try the Futaba.
Thanks again for the help.
Matt

Thank you.
19216811-login


Top
 Profile  
 
 Post subject: Re:
PostPosted: Fri Aug 09, 2019 15:17:37 
Offline

Joined: Fri Aug 09, 2019 15:16:19
Posts: 3
mpetrich wrote:
Thanks for the information.
I think I am just going to dump the Hitec servos and try the Futaba.auto clicker word unscrambler jumble solver
Thanks again for the help.
Matt

I finished setting up my M18 yesterday. I am using the Hitec 81MG servo, Novak SPY esc, Novak XXL receiver and the transmitter from my Losi Mini-T. The Hitec servo has been acting crazy. The servo won't center, moves back and forth on its own and cannot be trimmed. I don't think it's an interference problem. Is there an issue with this servo and the XXL receiver?


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC + 2 hours


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group