XRAY - Model racing cars
http://forum.teamxray.com/

67mm Rear axles
http://forum.teamxray.com/viewtopic.php?f=111&t=27252
Page 1 of 1

Author:  bigpete650 [ Fri Mar 30, 2018 02:43:30 ]
Post subject:  67mm Rear axles

Just bought a 2018 xb2 carpet edition. I finished the build and noticed that when turning the left rear tire the right rear arm and tire raise up if I try to turn the right rear it still wants to raise up. If I hold both arms flat I have no issues. I’ve installed 2mm shims in the shocks. The axles does not look bent. I be been told by other Xray owners they have the same issue. Do I need to add more than 2mm shims to fix this? Thanks for any reply’s in advance

Author:  AlexanderL [ Thu Apr 05, 2018 23:38:07 ]
Post subject:  Re: 67mm Rear axles

bigpete650 wrote:
Just bought a 2018 xb2 carpet edition. I finished the build and noticed that when turning the left rear tire the right rear arm and tire raise up if I try to turn the right rear it still wants to raise up. If I hold both arms flat I have no issues. I’ve installed 2mm shims in the shocks. The axles does not look bent. I be been told by other Xray owners they have the same issue. Do I need to add more than 2mm shims to fix this? Thanks for any reply’s in advance


Sounds strange. Have you checked that the CVD is built correctly on the right hand side?
This could happen if the pin is inserted the wrong way through the barrel.

/Greger

Page 1 of 1 All times are UTC + 2 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/