XRAY - Model racing cars
http://forum.teamxray.com/

XT2 Slipper Eliminator Problem
http://forum.teamxray.com/viewtopic.php?f=111&t=27271
Page 1 of 1

Author:  tony814u [ Fri May 11, 2018 02:14:57 ]
Post subject:  XT2 Slipper Eliminator Problem

I bought the xray 324100 slipper eliminator with the 69 and 72 gear.
At my track I am using a 84 spur and 27 pinion with the slipper. By doing the math to end up with about the same gear ratio I will need to put the 72 eliminator gear with a 23 pinion.
I can't slide the motor back enough to get on that small of a pinion. A 27 pinion is the smallest that will reach the 72 gear. Where can I find a larger eliminator gear so I can achieve the same gear ratio?

Page 1 of 1 All times are UTC + 2 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/