XRAY - Model racing cars
http://forum.teamxray.com/

XRAY NT18 General Forum
http://forum.teamxray.com/viewtopic.php?f=18&t=2337
Page 9 of 11

Author:  irish [ Tue Mar 21, 2006 22:20:54 ]
Post subject:  Re: does it come with a starter box

pd kid wrote:
it sayes on nt18 and the nt18t that there is an aftermarket starter box is it included with the cars or if not how do you start them.
help apprecated


yea its a hudy starter box. it is seperate cost $84 -$89

Author:  pd kid [ Tue Mar 21, 2006 22:25:45 ]
Post subject: 

o ok is the engine easy to turn over and what batteries does it use

Author:  irish [ Tue Mar 21, 2006 22:28:18 ]
Post subject: 

pd kid wrote:
o ok is the engine easy to turn over and what batteries does it use


yea it is pretty easy to turn over. but no difrent then starting like a .12 or .15 just crank till fuel is in the lines then put glow igniter etc.. the hudy starter box that is made for it uses any standard size (7.2) 6 cell pack...

Author:  Jocache83 [ Sat Apr 01, 2006 20:24:14 ]
Post subject: 

http://www.teamxray.com/teamxray/produc ... egoria=111

why is there more holes on the chassis on the electronic side than the kit i have??[/url][url][/url]

is that a new chassis?

Author:  irish [ Sat Apr 01, 2006 21:06:32 ]
Post subject: 

Jocache83 wrote:
http://www.teamxray.com/teamxray/products/proddesc.php?prod_id=1610&page=2&kategoria=111

why is there more holes on the chassis on the electronic side than the kit i have??[/url][url][/url]

is that a new chassis?


same with mine they must have used one of there first protype chassis or something suprised i didnt see that before..

Author:  mario [ Sun Apr 02, 2006 22:39:29 ]
Post subject: 

All promo material (leaflets, advertisement, web site) were made based on the pre-production and since XRAY keeps ongoing development some specifications may always vary. What you got in the kit is the latest final design.

Author:  irish [ Mon Apr 03, 2006 01:52:53 ]
Post subject: 

mario wrote:
All promo material (leaflets, advertisement, web site) were made based on the pre-production and since XRAY keeps ongoing development some specifications may always vary. What you got in the kit is the latest final design.


mario lets her your comments and opinions regarding the leaky engine problem and the exhaust problem people are having.. are you aware that every time they get hit or hit a rail on a track or etc the exhaust bends and breaks easily?

Author:  Jocache83 [ Tue Apr 04, 2006 23:56:35 ]
Post subject: 

mario wrote:
All promo material (leaflets, advertisement, web site) were made based on the pre-production and since XRAY keeps ongoing development some specifications may always vary. What you got in the kit is the latest final design.


Mario,
can i have the "pre-production" chassis please? :D ill be happy to use that chassis.

Author:  mario [ Sun Apr 09, 2006 22:45:50 ]
Post subject: 

The new 2-piece muffler for NT18T can be easily mounted to the NT18 and this should help to withstand serious crashes. Part number will be posted as soon the mufflers will get available, which should be very soon.

Author:  irish [ Sun Apr 09, 2006 23:06:36 ]
Post subject: 

mario wrote:
The new 2-piece muffler for NT18T can be easily mounted to the NT18 and this should help to withstand serious crashes. Part number will be posted as soon the mufflers will get available, which should be very soon.


yea it should have been included in the original kit.......

Author:  Barkley Abernethy [ Tue Apr 11, 2006 23:00:50 ]
Post subject: 

i tried the one way diff , found the wee lady to be a tad nervious with it i think i will go back to a ball diff in the front,i sort of forgot myself and used the brake so it was rather snappy and no fun .

Author:  Jocache83 [ Wed Apr 12, 2006 00:22:10 ]
Post subject: 

Mario,
so what do u say about me getting the "pre-production" chassis? :D

Author:  WerxRacing [ Tue Aug 01, 2006 04:10:33 ]
Post subject: 

I like my NT18, Did you know the HPI made a 1/18 Nitro Micro about 12 years back, but the market didn't want it. Now Losi started the 1/18 & Xray put the nitro back in it. YES >>>>>> THANK YOU.......

Author:  irish [ Tue Aug 01, 2006 04:59:48 ]
Post subject: 

no hpi did not your confused with the 1/12 scale nitro unless there something that no one else seen

Author:  WerxRacing [ Tue Aug 01, 2006 05:30:59 ]
Post subject: 

http://www.hpiracing.com/graphics/instr ... mini-1.jpg

Author:  irish [ Tue Aug 01, 2006 05:32:56 ]
Post subject: 

yea thats a 1/12th scale we have talked about that plenty times.....

Author:  WerxRacing [ Wed Aug 02, 2006 02:26:08 ]
Post subject: 

Ok, When I found it on there site it was at the bottum of the instruction list far away from the other 1/12 RS4 cars. I was on there trying to find info for my RS4 Racer 2 when I saw it. I was thinking it waslike the 1/16 cars that are out. Well maybe they wil get on the band wagon with all the others & get one out there. They do make a great 1/10 truck( got 2 of there SAVGAES).

Author:  irish [ Wed Aug 02, 2006 02:29:52 ]
Post subject: 

yea HPI is due for one. good stuff

Author:  WerxRacing [ Wed Aug 02, 2006 03:53:04 ]
Post subject: 

Well on the look for upgrades now. I just got 2 sets of aluminum blue drive shafts, front one-way differential, aluminum adjustable ball differential & a Mazda 626 body. I e-mailed PTI & asked about more bodies. I got there 2005 Mustang body & really like it. I was thinking the more of us that e-mail or call the body companies we can get the ball moving faster for so we can personalize our NT18's& NT18T's. Also looking into the wheels now.

Author:  bigb [ Mon Aug 28, 2006 03:32:12 ]
Post subject: 

has anybody tried the drake micro engine on the nt18 yet?

Page 9 of 11 All times are UTC + 2 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/