XRAY - Model racing cars
http://forum.teamxray.com/

Just bought a nt18
http://forum.teamxray.com/viewtopic.php?f=18&t=8846
Page 1 of 1

Author:  maxx919 [ Thu Feb 19, 2009 05:27:18 ]
Post subject:  Just bought a nt18

hey everyone,
this is my first post so let me introduce myself. I'm Chris and I've been in RC for 10 years. I have 2 tmaxx's, 1 sportwerks chaos, i'm building a UE supermaxx and now i have a 1 1/2 nt18's.

I just bought a used nt18 with some extras and was looking at getting the hex driveshafts and new foam tires. but can anyone tell me what the degrees mean for the front and rear tires?? https://www.amainhobbies.com/advanced_s ... ex&x=0&y=0

I'm new to the on road world so i will probably have some questions. HEre's a pic of the nt18 i bought... Image

Thanks

Author:  Roelof [ Thu Feb 19, 2009 09:20:59 ]
Post subject: 

The degrees is the shore rating. A higher number means a harder tire.

Author:  Lord Of Bracelets [ Thu Feb 19, 2009 10:33:22 ]
Post subject: 

Higher number=>less grip=>less wear
Lower number=>more grip=>more wear

Author:  maxx919 [ Thu Feb 19, 2009 14:37:07 ]
Post subject: 

cool thanks for the info

Author:  maxx919 [ Thu Feb 19, 2009 15:32:08 ]
Post subject: 

another question, is there any modification necessary in order to run a picco p-0 in a nt18? thanks

Author:  Roelof [ Thu Feb 19, 2009 16:18:44 ]
Post subject: 

viewtopic.php?t=5050&highlight=picco

viewtopic.php?t=5073&highlight=picco

viewtopic.php?t=4920&highlight=picco

viewtopic.php?t=4326&highlight=picco

Author:  maxx919 [ Thu Feb 19, 2009 22:46:26 ]
Post subject: 

cool thanks. and i was looking at the wheels and how do they come off? i don't see a screw or anything??

also what glow plug do you guys recommend?
thanks

Author:  matt_xb8r [ Thu Feb 19, 2009 23:36:31 ]
Post subject: 

the wheels will pull straight off and there is minor mods needed to fit the P-0 in there.

Hope you enjoy NT18's!!

Author:  maxx919 [ Thu Feb 19, 2009 23:42:38 ]
Post subject: 

matt_xb8r wrote:
the wheels will pull straight off and there is minor mods needed to fit the P-0 in there.

Hope you enjoy NT18's!!


thanks. I ran it today and it runs really well. it's QUICK! what glow plugs were you using in it?

Author:  matt_xb8r [ Fri Feb 20, 2009 17:35:37 ]
Post subject: 

the one thats in there was the one that came with it but you can use from a medium to a hot plug. The hotter plug will probably do a little better in a motor that small. I would try an MC-59 on cooler days and maybe an MC-8 on warm or hot days.

Author:  alexemil5 [ Fri Jan 04, 2013 12:09:46 ]
Post subject:  Re: Just bought a nt18

Thanks for the answers...
I also need help in picco p-0 in a nt18... Got it now.



plagiarismsoftware.org

Page 1 of 1 All times are UTC + 2 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/