XRAY - Model racing cars

It is currently Tue Sep 17, 2019 08:53:58

All times are UTC + 2 hours




Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: Engine mount lower
PostPosted: Thu Sep 18, 2014 19:40:34 
Offline

Joined: Fri May 09, 2014 10:30:54
Posts: 36
hello.

the engine mount "lower" makes the engine touches the chassis? for xray nt1 2014, greetings.


Top
 Profile  
 
 Post subject: Re: Engine mount lower
PostPosted: Fri Sep 19, 2014 12:35:21 
Offline
User avatar

Joined: Fri Sep 10, 2004 05:52:13
Posts: 1354
Location: Trencin, Slovakia
The #338717 Thin lower engine mounts must be used with #338534 Alu Flywheel Reverse XCA- Flat 30mm.


Top
 Profile  
 
 Post subject: Re: Engine mount lower
PostPosted: Sat Oct 04, 2014 01:38:52 
Offline

Joined: Fri May 09, 2014 10:30:54
Posts: 36
Thanks, those references have in the car, but that's not the problem, the problem is that the Crankcase touches the chassis.

the Crankcase at its lowest point in contact with the chassis and my question is if it is normal to happen with the bench "lower" and if there is any risk of breaking some sort.

in this video you can see what I want to explain, as the engine touches the chassis, in the second 12 (0:12)

http://youtu.be/0ma7Li_qiig


Top
 Profile  
 
 Post subject: Re: Engine mount lower
PostPosted: Sun Oct 05, 2014 19:44:02 
Offline

Joined: Sun Sep 20, 2009 15:17:09
Posts: 311
Location: Frankfurt, Germany
Azul. wrote:
Thanks, those references have in the car, but that's not the problem, the problem is that the Crankcase touches the chassis.

the Crankcase at its lowest point in contact with the chassis and my question is if it is normal to happen with the bench "lower" and if there is any risk of breaking some sort.

in this video you can see what I want to explain, as the engine touches the chassis, in the second 12 (0:12)

http://youtu.be/0ma7Li_qiig

Hello Azul,
no, this is not normal and must be resolved in your case. These -1.5mm engine mounts are for engines that would sit too high with the standard lower mounts. In your case with the Sirio you must use #338710 (incl. with the kit).


Top
 Profile  
 
 Post subject: Re: Engine mount lower
PostPosted: Sun Oct 05, 2014 22:04:11 
Offline

Joined: Fri May 09, 2014 10:30:54
Posts: 36
hi,
I also have the piece that includes the kit, but I put that option, I also engine Novarossi PT and it is exactly the same problem.


Top
 Profile  
 
 Post subject: Re: Engine mount lower
PostPosted: Mon Oct 06, 2014 23:59:53 
Offline

Joined: Sun Sep 20, 2009 15:17:09
Posts: 311
Location: Frankfurt, Germany
Ok. But then the Novarossi engines have their mounts a little lower, too. If you have both mounts then use the ones that fit. The kit mounts should work with all engines, some engines may sit a little higher with the kit mounts.


Top
 Profile  
 
 Post subject: Re: Engine mount lower
PostPosted: Tue Oct 07, 2014 00:40:34 
Offline

Joined: Fri May 09, 2014 10:30:54
Posts: 36
yes, it is true, today I tried five engines,Sirio XXX and Nemesis touches the chassis,Novarossi PT & Flash touches the chassis, Plus 3 STC NOT touch the chassis.

to save me trouble I remount the standard engine mount included in the kit.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC + 2 hours


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group