XRAY - Model racing cars

It is currently Thu Oct 17, 2019 10:19:49

All times are UTC + 2 hours




Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: x12 setup
PostPosted: Sun May 12, 2013 20:51:29 
Offline

Joined: Sun May 12, 2013 20:32:57
Posts: 2
Hello,
I can't find any setup sheets for the X12 running in 17.5 blinky mode.

Can somebody please tell me a good all-around setup for the x12 in blinky mode?

thanks


Top
 Profile  
 
 Post subject: Re: x12 setup
PostPosted: Mon May 13, 2013 14:35:11 
Offline
team driver
User avatar

Joined: Fri Sep 10, 2004 19:27:57
Posts: 977
Location: Sweden
Do you race on a carpet surface?


Top
 Profile  
 
 Post subject: Re: x12 setup
PostPosted: Mon May 13, 2013 14:47:16 
Offline

Joined: Sun May 12, 2013 20:32:57
Posts: 2
yes. on the 5280 carpet track in Denver and I will be racing on their old carpet in a track that is opening up in pueblo. I am also planning on running at IIC in October this year.

I would like to know a good general setup that will work in most situations. and also what springs and other parts I should get to allow me to adjust the car as needed.


Top
 Profile  
 
 Post subject: Re: x12 setup
PostPosted: Mon Jun 03, 2013 22:46:46 
Offline
team driver
User avatar

Joined: Fri Sep 10, 2004 19:27:57
Posts: 977
Location: Sweden
This set-up is for high bite carpet:
xform/index.php?act=view&ID=83&setup=x12 (however for a flat surface please use 3-3.5mm ride height instead of 4, since that track was very bumpy which I ran at)

This is for low bite:
xform/index.php?act=view&ID=78&setup=x12

It is useful to get the optional side springs from XRAY, the black ones for instance. Try also the spring set from RC America: RCA 906.

As for the center spring, I usually use the kit spring.


Top
 Profile  
 
 Post subject: Re: x12 setup
PostPosted: Fri Apr 25, 2014 11:17:03 
Offline

Joined: Thu Apr 24, 2014 07:43:21
Posts: 2
Any setups for tarmac tracks?

Joe F


Top
 Profile  
 
 Post subject: Re: x12 setup
PostPosted: Wed May 14, 2014 00:07:39 
Offline
team driver
User avatar

Joined: Fri Sep 10, 2004 19:27:57
Posts: 977
Location: Sweden
xform/index.php?act=view&ID=36&setup=x12_2014

This setup is for indoor asphalt


Top
 Profile  
 
 Post subject: Re: x12 setup
PostPosted: Wed Jun 04, 2014 13:50:49 
Offline

Joined: Sat Jun 18, 2005 12:48:40
Posts: 1357
Location: Windsor, UK
Hi Alex, would you change anything on those setups for the 2014 version of the X12?
I'm particulary interest in the low grip setup, as this is closer to the conditions of some of our smaller club meetings.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC + 2 hours


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group