XRAY - Model racing cars
http://forum.teamxray.com/

middle ride height
http://forum.teamxray.com/viewtopic.php?f=24&t=18895
Page 1 of 1

Author:  chachotu2 [ Thu Nov 27, 2014 11:04:23 ]
Post subject:  middle ride height

hello i had build my x12, 15 and without electronics my center ride height is 3 mm when in front is 4,8 and 5 in rear, this is due to the diameter of the tires, my questios is the side spring are used for??? lateral balance?? i have to raise the preload of the spring??

Author:  chachotu2 [ Thu Nov 27, 2014 11:05:27 ]
Post subject:  Re: middle ride height

the spring of the center shock i was trying to say..

Author:  Hagberg [ Tue Dec 09, 2014 22:06:58 ]
Post subject:  Re: middle ride height

If your center ride height is much lower than front, and rear pod, then you need more preload in the center spring! Adjust the rear pod droop accordingly

Author:  chachotu2 [ Tue Dec 16, 2014 00:58:01 ]
Post subject:  Re: middle ride height

thanks alex, i will setup when my electronics arrive..

Page 1 of 1 All times are UTC + 2 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/