XRAY - Model racing cars

It is currently Sat Nov 25, 2017 02:09:32

All times are UTC + 2 hours




Post new topic Reply to topic  [ 9 posts ] 
Author Message
 Post subject: X12 differential
PostPosted: Tue Jan 20, 2015 02:52:28 
Offline

Joined: Tue Jan 20, 2015 02:31:28
Posts: 6
Pls let me know if anyone ve same problem
I build my x12 diff according to the instructions manual but it slips and not smooth at all.
I replaces the trust bearing unit to a b bearing and it works better........


Last edited by Freekick7 on Wed Jan 21, 2015 12:53:40, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: X12 differential
PostPosted: Tue Jan 20, 2015 16:48:30 
Offline
team driver
User avatar

Joined: Mon Nov 18, 2013 11:37:46
Posts: 73
Hey,

sorry to hear about your problem. I have some questions.

are you using standard spur gear?

Have you sanded the diff plates flat?

Which grease do you use?

Regards
Olly


Top
 Profile  
 
 Post subject: Re: X12 differential
PostPosted: Wed Jan 21, 2015 11:15:55 
Offline

Joined: Thu Aug 07, 2014 10:05:05
Posts: 16
Olly Jefferies wrote:
Hey,

sorry to hear about your problem. I have some questions.

are you using standard spur gear?

Have you sanded the diff plates flat?

Which grease do you use?

Regards
Olly


Hey Olly,

I use the AE diff grease on my X12 and sand the plates with 600 grit sand paper.

Would you suggest something else?

Lois


Top
 Profile  
 
 Post subject: Re: X12 differential
PostPosted: Wed Jan 21, 2015 11:31:44 
Offline
team driver
User avatar

Joined: Mon Nov 18, 2013 11:37:46
Posts: 73
Hey,

I use 800 wet n dry. Your grease should be fine :)

Regards


Top
 Profile  
 
 Post subject: Re: X12 differential
PostPosted: Wed Jan 21, 2015 12:56:26 
Offline

Joined: Tue Jan 20, 2015 02:31:28
Posts: 6
[quote="Olly Jefferies"]Hey,

sorry to hear about your problem. I have some questions.

are you using standard spur gear?

Have you sanded the diff plates flat?

Which grease do you use?

Regards
Olly


Top
 Profile  
 
 Post subject: Re: X12 differential
PostPosted: Wed Jan 21, 2015 13:05:49 
Offline

Joined: Tue Jan 20, 2015 02:31:28
Posts: 6
Hi Olly

I use AE grease, kawada spur, and I didn't sand the plate.

Tks
Dave


Top
 Profile  
 
 Post subject: Re: X12 differential
PostPosted: Thu Jan 22, 2015 15:09:00 
Offline
team driver
User avatar

Joined: Mon Nov 18, 2013 11:37:46
Posts: 73
Hey,

Please try build with standard spur gear to see if problem goes away.

To get a smoother diff try sanding the diff plates on a piece of 800 wet n dry. Fit the plate to one of the diff hubs then sand in a circular motion. Make sure the sand paper is on top of your set up board so its on a nice flat surface.

Hope this helps.
Oj


Top
 Profile  
 
 Post subject: Re: X12 differential
PostPosted: Thu Jan 22, 2015 16:39:14 
Offline

Joined: Tue Jan 20, 2015 02:31:28
Posts: 6
Thanks for the advice

I will try all and let you know
Unfortunately X-ray spurs are not easy to find here.......

Cheers
Dave


Top
 Profile  
 
 Post subject: Re: X12 differential
PostPosted: Thu Feb 05, 2015 18:36:56 
Offline

Joined: Sat Jan 18, 2014 15:46:16
Posts: 18
Freekick7 wrote:
Thanks for the advice

I will try all and let you know
Unfortunately X-ray spurs are not easy to find here.......

Cheers
Dave

i use kawada spur and i havent any problem, i don,t sand the diff plates and it take some time before the balls sit in the plates and do not slip at all, in my hands it cotinues slip but the diff don,t slip under power...thats it is the important thing.. i think


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC + 2 hours


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group