XRAY - Model racing cars

It is currently Wed Nov 21, 2018 08:04:21

All times are UTC + 2 hours




Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: Questions from a new 1/12 scale driver
PostPosted: Mon Aug 31, 2009 01:55:27 
Offline
User avatar

Joined: Mon Dec 01, 2008 03:26:29
Posts: 26
Location: Atlanta, Georgia
I normally run a T2 009, but have decided to run the XII as well at my local carpet track. I have a few questions.

-What is the typical ride height I should be trying to achieve with the car?
-Is it acceptable to shim the rear pod instead of changing the eccentric holders or does this not work?
-will ceramic diff balls help the longevity between diff re-builds?
-Are there any basic maintenance thing to look for after each run?
-Is it typical to have ride height vary a 1/2 mm side to side or middle to rear or front to rear?

Thanks [/list]


Top
 Profile  
 
 Post subject:
PostPosted: Mon Aug 31, 2009 11:36:31 
Offline
User avatar

Joined: Fri Aug 24, 2007 11:35:56
Posts: 119
Location: Germany
Hey,

- normal ride height: >3,0mm, but of course only on veeery flat surfaces (I normally set it to about 3,5mm)

- I am not sure about shimming the rear pod; I did not see anybody yet doing it but I also would be interested if that really works properly

- I use the original diff balls which are already pretty good and I do not have problems with the lifespan between the rebuilts (>25 runs no problem and it still works like brand new); just make sure you don't use too much grease because that attracts dirt which reduces the lifespan between rebuilts (especially in 1/12 cause the diff is open unlike in the TC)
I don't know how your experiences with ceramic diff balls in the TC are but you have to keep in mind ceramic balls will break pretty easily when treated wrong (tightened a bit too much)

- maintenance: I recommend you to change tires between right and left (in a competition every run; just4fun about every 3rd or 4th run) because they wear differently; watch out the edges of the T-Bar - if they get a little white you should think about changing it when the car handles strange; watch out there is always a lubricant inside the friction dampener; besides these points just things you look for in the TC, too (any worn out parts like the steering blocks; does everything move freely...)

- from left to right it must NOT vary! Rear should be a bit higher than the front; it's OK when it varies from front to rear

Hope I could help you a bit!

Regards


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC + 2 hours


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group