XRAY - Model racing cars

It is currently Tue Sep 25, 2018 03:33:45

All times are UTC + 2 hours




Post new topic Reply to topic  [ 23 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: Hellooooo?
PostPosted: Sat Jan 02, 2010 15:49:38 
Offline
User avatar

Joined: Thu Mar 03, 2005 23:03:34
Posts: 730
Location: Canada
Really disappointing to see no interest in this car from anybody other than me. Even the XII isn't getting the attention it should and there was a new chassis just announced :x I log on this morning and every thread is lit up with a new post except the X10 & XII :(


Top
 Profile  
 
 Post subject: Re: Hellooooo? XRAY?
PostPosted: Mon Jun 14, 2010 20:09:37 
Offline
User avatar

Joined: Thu Mar 03, 2005 23:03:34
Posts: 730
Location: Canada
I'm bumping this up cause I don't think anybody from XRAY...not mods, people who actually work on the design of the cars...is paying attention to this car :(

I searched X10 in the News section of the main site and since the first news release the X10 has been in 6 other posts. That's 6 in one year, 1 every 2 months. And they have been just to tell us that downloads are ready or it's shipping, big deal. Why isn't this car getting more attention? Are any team drivers using it?


Top
 Profile  
 
 Post subject: Re: Hellooooo?
PostPosted: Wed Jun 16, 2010 15:33:41 
Offline
User avatar

Joined: Thu Mar 03, 2005 23:03:34
Posts: 730
Location: Canada
I received an email saying there was a reply to this thread but it seems to be gone. Why? Did the poster delete the post?

No post from XRAY makes me wonder why they bothered with this car in the first place :? I just want a response to the items that have been mentioned. Not too much to ask as far as I'm concerned.


Top
 Profile  
 
 Post subject: Re: Hellooooo?
PostPosted: Thu Jun 17, 2010 14:40:53 
Offline
User avatar

Joined: Thu Mar 03, 2005 23:03:34
Posts: 730
Location: Canada
Has anybody from XRAY even looked at this thread, or section for that matter?

Oh well, I guess we're doing ok with other brand parts :roll:


Top
 Profile  
 
 Post subject: Re: Hellooooo?
PostPosted: Fri Jun 18, 2010 16:19:56 
Offline
User avatar

Joined: Thu Mar 03, 2005 23:03:34
Posts: 730
Location: Canada
This thread gets more Spam hits then Xray hits :roll:


Top
 Profile  
 
 Post subject: Re: Hellooooo?
PostPosted: Sat Jun 19, 2010 09:15:59 
Offline

Joined: Wed Jan 05, 2005 14:21:25
Posts: 78
Hello Foxy,

I'm from France and I raced NT1.
I order my X10L and I will receive at the begining of july...

The electronics on it:
- Speed Passion GT2 LPF with revised soft
- Speed Passion V3 10.5 motor
- Savöx 1251 Low Profile servo
- Intellect 5000/50C 2S LiPo

As my other cars I will make a presentation.

Au revoir.
Romuald


Top
 Profile  
 
 Post subject: Re: Hellooooo?
PostPosted: Mon Jun 21, 2010 15:04:22 
Offline
User avatar

Joined: Thu Mar 03, 2005 23:03:34
Posts: 730
Location: Canada
romuald31 wrote:
Hello Foxy,

I'm from France and I raced NT1.
I order my X10L and I will receive at the begining of july...

The electronics on it:
- Speed Passion GT2 LPF with revised soft
- Speed Passion V3 10.5 motor
- Savöx 1251 Low Profile servo
- Intellect 5000/50C 2S LiPo

As my other cars I will make a presentation.

Au revoir.
Romuald


Please yet me know if you can control the car at all :| At our track we were running 17.5 with 2 cell and most of us found it uncontrollable. We have now gone to 25.5 2 cell and it's the best racing ever.

I suspect a 10.5 2 cell will be good for speed runs in a straight line but good luck on the track with it.


Top
 Profile  
 
 Post subject: Re: Hellooooo?
PostPosted: Mon Jun 21, 2010 18:37:42 
Offline

Joined: Mon Jan 25, 2010 20:52:48
Posts: 29
Location: Amstetten/Austria
I run my X10 with 13,5T and a SXX Stock Spec. And it runs very good! With the right Tires and Grip Fluid!!! When the Carbon Axle makes no Problems! I crashed my second one!!!Alway´s the Screw gets outside a little bit and that´s it!!??


Top
 Profile  
 
 Post subject: Re: Hellooooo?
PostPosted: Tue Jun 22, 2010 04:36:36 
Offline
User avatar

Joined: Thu Mar 03, 2005 23:03:34
Posts: 730
Location: Canada
Anyway, back on topic. Still no word from Xray.

That's great customer support. Let's build a car then never help the customer with any questions they have while we work on another TC :roll:

I woke up on the wrong side of the bed tonight, missed my show, now I have to try to sleep before work, I'm grumpy :evil: After all that I come on here to finally see a response from Xray and nothing. Sure glad there are great guys at the track, none that are local sponsored drivers though, where are they? (judging from my comments it'll never be me :lol: :lol: )


Top
 Profile  
 
 Post subject: Re: Hellooooo?
PostPosted: Wed Jun 23, 2010 14:56:02 
Offline
User avatar

Joined: Fri Sep 10, 2004 05:52:13
Posts: 1354
Location: Trencin, Slovakia
You can be sure that XRAY is watching also this thread however XRAY team drivers are not driving X10 pan car so here are not so many posts.


Top
 Profile  
 
 Post subject: Re: Hellooooo?
PostPosted: Wed Jun 23, 2010 15:21:31 
Offline
User avatar

Joined: Thu Mar 03, 2005 23:03:34
Posts: 730
Location: Canada
So because there are no Xray Team Drivers using the car the actual users get no option parts like shock springs and wide rear body mounts?

:idea: Get the stuff to the people who use the car and buy the parts, before we switch brands and you don't sell anything.

Or am I way off base here? Are springs that hard to make? No real testing is needed (by Team Drivers) I think. Just make some springs with different rates, shouldn't be hard :? The wide body mount is being used by people at my track...sorry, a modified mount is being used with no ill effects to the car so no Testing needed there either, just make the part :wink:

I don't care about the number of post's in the section. We as drivers want results from Xray with regards to our inquiries of the above mentioned items, plus what ever else I missed. Oh, side springs to, please :D


Top
 Profile  
 
 Post subject: Re: Hellooooo?
PostPosted: Thu Jun 24, 2010 22:23:16 
Offline
User avatar

Joined: Thu Mar 03, 2005 23:03:34
Posts: 730
Location: Canada
:|


Top
 Profile  
 
 Post subject: Re: Hellooooo?
PostPosted: Sun Jun 27, 2010 13:21:40 
Offline
User avatar

Joined: Thu Mar 03, 2005 23:03:34
Posts: 730
Location: Canada
Since it's the weekend I suspect they are all racing :wink:


Top
 Profile  
 
 Post subject: Re: Hellooooo?
PostPosted: Tue Jun 29, 2010 08:49:13 
Offline
User avatar

Joined: Fri Sep 10, 2004 05:52:13
Posts: 1354
Location: Trencin, Slovakia
You can bet Xray will continue to develop and make only the finest and premium new products and new cars all the time, now the team drivers are testing new shock springs, however please note that all new parts must be first tested and after long term testing they will be offered.


Top
 Profile  
 
 Post subject: Re: Hellooooo?
PostPosted: Tue Jun 29, 2010 14:06:21 
Offline
User avatar

Joined: Thu Mar 03, 2005 23:03:34
Posts: 730
Location: Canada
brano wrote:
You can be sure that XRAY is watching also this thread however XRAY team drivers are not driving X10 pan car so here are not so many posts.
posted june 23


brano wrote:
You can bet Xray will continue to develop and make only the finest and premium new products and new cars all the time, now the team drivers are testing new shock springs, however please note that all new parts must be first tested and after long term testing they will be offered.
posted june 29

So between these two posts team drivers got cars and now have test springs? That's quick.

So how long will testing take? Will we see a new version of the X10 before we see option parts?


Top
 Profile  
 
 Post subject: Re: Hellooooo?
PostPosted: Wed Jul 07, 2010 15:59:26 
Offline
User avatar

Joined: Fri Sep 03, 2004 11:22:56
Posts: 2497
Location: Trencin, Slovakia
FOXY923 wrote:
brano wrote:
You can be sure that XRAY is watching also this thread however XRAY team drivers are not driving X10 pan car so here are not so many posts.
posted june 23


brano wrote:
You can bet Xray will continue to develop and make only the finest and premium new products and new cars all the time, now the team drivers are testing new shock springs, however please note that all new parts must be first tested and after long term testing they will be offered.
posted june 29

So between these two posts team drivers got cars and now have test springs? That's quick.

So how long will testing take? Will we see a new version of the X10 before we see option parts?


We appologize for any delays but the races for the 1/10 pan cars are limited and as such the testing possibilities are reduced and there is nothing we can do just to have the new parts and prototypes tested before the production will start. Therefore the only feasible solution I can have is just to use some other springs from the market. As soon some new option parts will be made available these will be presented at the XRAY web site. Once again we appologize for any inconvenience this may bring to all the X10 owners.


Top
 Profile  
 
 Post subject: Re: Hellooooo?
PostPosted: Wed Jul 07, 2010 16:51:06 
Offline
User avatar

Joined: Thu Mar 03, 2005 23:03:34
Posts: 730
Location: Canada
mario wrote:
We appologize for any delays but the races for the 1/10 pan cars are limited and as such the testing possibilities are reduced and there is nothing we can do just to have the new parts and prototypes tested before the production will start. Therefore the only feasible solution I can have is just to use some other springs from the market. As soon some new option parts will be made available these will be presented at the XRAY web site. Once again we appologize for any inconvenience this may bring to all the X10 owners.


Thanks. We're doing that already cause it took this long to answer us.


Top
 Profile  
 
 Post subject: Re: Hellooooo?
PostPosted: Sun Jul 11, 2010 17:35:43 
Offline

Joined: Mon Apr 19, 2010 09:38:17
Posts: 34
mario wrote:
We appologize for any delays but the races for the 1/10 pan cars are limited and as such the testing possibilities are reduced and there is nothing we can do just to have the new parts and prototypes tested before the production will start. Therefore the only feasible solution I can have is just to use some other springs from the market. As soon some new option parts will be made available these will be presented at the XRAY web site. Once again we appologize for any inconvenience this may bring to all the X10 owners.


WE are more than happy to do prototype testing here at our race track in Ostersund Sweden, we will ofcource be happy to test all parts X10, afterall WE DO race the car and we have bought the car and we need the parts.....


Top
 Profile  
 
 Post subject: Re: Hellooooo?
PostPosted: Tue Jul 13, 2010 16:14:24 
Offline

Joined: Wed Jan 05, 2005 14:21:25
Posts: 78
Hello from France,

just finish the painting (Leo the Lion for my little boy!!).

Image

Begin the building next week.

Au revoir.


Top
 Profile  
 
 Post subject: Re: Hellooooo?
PostPosted: Mon Jul 19, 2010 23:50:13 
Offline

Joined: Wed Jan 05, 2005 14:21:25
Posts: 78
Hello from France,

just began the building of the X10L...

Nice materials, nice car...

http://www.yome3000.com/forums-lire.php ... &f=32#m651

Image


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 23 posts ]  Go to page 1, 2  Next

All times are UTC + 2 hours


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group