XRAY - Model racing cars
http://forum.teamxray.com/

X10 Link - Serious problem with unbalanced rear axle
http://forum.teamxray.com/viewtopic.php?f=26&t=11174
Page 1 of 1

Author:  ww2 [ Tue Mar 01, 2011 00:12:00 ]
Post subject:  X10 Link - Serious problem with unbalanced rear axle

My new X10 Link has a unbalanced rear axle. I tried different tires (new and used) and have always the same problem. The car has massive vibrations on the rear axle so that there is no way to get grip. I think that it is always bouncing a little bit. Is that a known problem with the X10 Link?

Here is a video:

http://dl.dropbox.com/u/3453802/x10link.wmv

Author:  FOXY923 [ Tue Mar 01, 2011 01:05:39 ]
Post subject:  Re: X10 Link - Serious problem with unbalanced rear axle

Is that the aluminum axle? It may be bent. What tires are you using? Are they on straight? I know I have to use Jaco cause the CRC's don't fit on the hubs right.

Author:  Badmerlin [ Tue Mar 01, 2011 01:10:16 ]
Post subject:  Re: X10 Link - Serious problem with unbalanced rear axle

Hey

You shoud mount the Graphite Axle from IRS it works very well.

Author:  ww2 [ Tue Mar 01, 2011 08:36:30 ]
Post subject:  Re: X10 Link - Serious problem with unbalanced rear axle

I use the aluminum axle with bsr tires.

Author:  FOXY923 [ Tue Mar 01, 2011 15:51:12 ]
Post subject:  Re: X10 Link - Serious problem with unbalanced rear axle

ww2 wrote:
I use the aluminum axle with bsr tires.


The bsr tires are the same as the CRC's. Check they are on straight.

Page 1 of 1 All times are UTC + 2 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/