XRAY - Model racing cars
http://forum.teamxray.com/

X10 15 ride height
http://forum.teamxray.com/viewtopic.php?f=26&t=18871
Page 1 of 1

Author:  Mark Christopher [ Mon Nov 17, 2014 23:12:28 ]
Post subject:  X10 15 ride height

the new contact tyres have bigger rims and im struggling to get a low 3 - 3.5mm ride height wheels are 50mm diameter

any thing im missing?

Author:  Mijo-dk [ Thu Nov 20, 2014 14:00:26 ]
Post subject:  Re: X10 15 ride height

We race on BSR in denmark , and front you have to have at least 2mm shims under front arms. In the rear , we make the tyres in the 54-56 mm and then have rideheight on 4-5mm , not ideal. have been looking on some other brands for the rear axle. Have seen ohers put spacers under both rear-pods , but I dont like that idea.

Author:  brano [ Thu Jan 15, 2015 06:50:48 ]
Post subject:  Re: X10 15 ride height

The best way is to use shims under the bulkheads - this is easiest way to get the correct ride height.

Author:  Mark Christopher [ Sun Feb 15, 2015 19:13:17 ]
Post subject:  Re: X10 15 ride height

thanks Brano done it and seems ok

Page 1 of 1 All times are UTC + 2 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/