XRAY - Model racing cars

It is currently Thu Dec 14, 2017 02:49:17

All times are UTC + 2 hours




Post new topic Reply to topic  [ 1 post ] 
Author Message
 Post subject: Tunning-2.5mm springs to oil range?
PostPosted: Wed Nov 29, 2017 13:03:32 
Offline

Joined: Mon Jul 15, 2013 13:45:44
Posts: 5
Hi everyone

i need to under stand how to tune with the shock springs and oils. i still have the stock springs(2.5mm) and oils(450) in. I have a setup station and red the book back to back a few times, and also scoured the forums for more info. The tuning manual tells me about the basics and the effect when adjusting where and what. Basically everything is about balance to get more traction front you have to take away at the back. That is how i understand it in principal.

Question: if i make use of a 2.5mm shock spring with 450 oil and want to change my shock spring to 2.6mm, will you recommend i change the oil to a thicker cst? say 500 or 550, or is there a general oil cst range to coil thickness that can be used? can i use a 2.5mm coil with an oil range of 350 to 550? There must be a limit where the oil will be to thick for the coil to function properly? if possible lets forget about ambient temperature for now.

My car is Xray T4 2018 model, i do club racing in ''Blinky" mode with zero timing on boost and turbo.

Sorry for the long post, thank you.

Regards
Jacques


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 

All times are UTC + 2 hours


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group