XRAY - Model racing cars
http://forum.teamxray.com/

Xray T2 '09 - Lipo Backstop
http://forum.teamxray.com/viewtopic.php?f=8&t=19346
Page 1 of 1

Author:  Nigel-James [ Tue Jun 07, 2016 22:14:50 ]
Post subject:  Xray T2 '09 - Lipo Backstop

My T2 manual does not have a part number for lipo backstops.

Can I use the lipo backstops for the T3 on my T2?

http://www.rcdisco.com/part-info.php?partNo=XR306184

It looks like I have the correct mounting holes on my T2 for it to fit, but just wanted to be sure.

Cheers.

Author:  beale [ Thu Jun 09, 2016 09:04:16 ]
Post subject:  Re: Xray T2 '09 - Lipo Backstop

Not sure as the 09 was a 6 cell chassis so just had corner stops. It would probably work with a couple of holes, there was a conversion that lifted the top deck but can't remember what they used for the stops. You can find info on the homepage

Author:  Nigel-James [ Wed Jun 29, 2016 12:51:39 ]
Post subject:  Re: Xray T2 '09 - Lipo Backstop

Ok, I ordered some aluminium Xray lipo backstops for the T3 and they definitely don't fit the T2.

Not a problem though, I just drilled the necessary holes in the chassis to allow the backstops to fit.

Quote:
there was a conversion that lifted the top deck


The conversion kit would have been perfect but it's near impossible to find it anywhere, nevermind, found a solution in the end.

Thanks all the same. :)

Page 1 of 1 All times are UTC + 2 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/