XRAY - Model racing cars
http://forum.teamxray.com/

X-ray t3’12
http://forum.teamxray.com/viewtopic.php?f=8&t=19608
Page 1 of 1

Author:  Chris Lovely [ Wed Oct 04, 2017 15:55:06 ]
Post subject:  X-ray t3’12

Hi guys
Need some help. Been helping a friend out. He has a t3’11 which slowly we’ve turned into the 2012 edition. Flipped the steering round, added the upper bulkheads and also changed to the 12 top deck.
I intend to swap out the composite shims, for alu due to binding and he has a set of alloy shocks on loan. He’s on a limited budget so what I can do to improve the car
I’m going to replace the shock bladders with Tamiya
We use the car on a super low grip surface

Author:  Bikerbob [ Tue Jul 03, 2018 07:46:26 ]
Post subject:  Re: X-ray t3’12

Looks like this thread is not being used anymore so I will post here.

Anyone got a good working setup for this car on CRC black carpet?

I am going to be running this on that surface. I will see about some of the T4 setups.. but if anyone is still running this and reading it.

Would like to see your setup.

James

Page 1 of 1 All times are UTC + 2 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/