XRAY - Model racing cars
http://forum.teamxray.com/

Q & A With the U.S. Racing Team
http://forum.teamxray.com/viewtopic.php?f=9&t=10536
Page 10 of 10

Author:  Reno Savoya [ Tue May 29, 2012 11:42:41 ]
Post subject:  Re: Q & A With the U.S. Racing Team

Sorry guys, I wasn't following this topic as it's for U.S team.
Arushmen, you shouldn't be worry! I'm using the 6 holes 1,2mm pistons from the kit and they work great! I use them in any condition and they are exctremely efficient! You can start with 500 front and 450 rear and go higher if the temperature is over 20 degrees celcius or with high grip. You can follow my last set-up sheets on the right section of the forum.
Concerning the springs, I use the soon to be released 3 stripes springs that we got from the Neo race back in April. I use the same ones front and rear and they are great in every condition too! No need to worry about modifying or changing this part of the setup all the time! Just changing oil depending on temperature and grip level!
The XB9 shocks are the best quality and durability I have ever use!

Enjoy your ride!
Reno

Author:  Martin Bayer [ Wed May 30, 2012 09:53:50 ]
Post subject:  Re: Q & A With the U.S. Racing Team

Hi Guys

I drove for many brands and XB9 shocks are the best that you can have. Quality and durability is amazing. Most time I use 8 hole pistons 1,2 in front with 500 oil and 1,3 rear with 600 oil. I prefer this shock set-up when track is bumby and low grip. When we have track with more grip and flat surface I use 6 piston with holes 1,3 everywhere. For front i use 500 oil and 450 for rear. Xray will have very soon new spring witch we use now. They are realy very good.
When is low grip i use 2 strips for rear and 3 strips for front. High grip 3 strips everywhere.

Martin Bayer

Author:  Arushmen [ Thu May 31, 2012 13:46:18 ]
Post subject:  Re: Q & A With the U.S. Racing Team

Thanks Mario, Reno and Martin, you reply are very important
I will test more and more
Thanks again

Author:  *HOKE* [ Fri Jul 06, 2012 09:19:01 ]
Post subject:  Re: Q & A With the U.S. Racing Team

Is there different striped springs to front and rear, or is it same spring in front and rear???

Can you guys give me part numbers to those springs please?

Author:  brano [ Mon Jul 09, 2012 08:21:30 ]
Post subject:  Re: Q & A With the U.S. Racing Team

The springs can be used in front or in rear, here are the part numbers, news will follow soon:

358274 XRAY PROGRESSIVE SPRINGS - SUPER-SOFT (2)
358275 XRAY PROGRESSIVE SPRINGS - SOFT - 1 STRIPE (2)
358276 XRAY PROGRESSIVE SPRINGS - SOFT-MEDIUM - 2 STRIPES (2)
358277 XRAY PROGRESSIVE SPRINGS - MEDIUM - 3 STRIPES (2)

Author:  Dos Andos [ Mon Jul 09, 2012 18:11:23 ]
Post subject:  Re: Q & A With the U.S. Racing Team

Hi all,
Is there any chance we could have the setup sheets for both the XB9 and XT8 from Josh Wheeler at the recent roar nationals?
Thanks in advance...

Author:  *HOKE* [ Mon Jul 09, 2012 23:30:51 ]
Post subject:  Re: Q & A With the U.S. Racing Team

brano wrote:
The springs can be used in front or in rear, here are the part numbers, news will follow soon:

358274 XRAY PROGRESSIVE SPRINGS - SUPER-SOFT (2)
358275 XRAY PROGRESSIVE SPRINGS - SOFT - 1 STRIPE (2)
358276 XRAY PROGRESSIVE SPRINGS - SOFT-MEDIUM - 2 STRIPES (2)
358277 XRAY PROGRESSIVE SPRINGS - MEDIUM - 3 STRIPES (2)



Thanks.

So when Martin says he use 3 stripe springs in front and rear, he uses same springs in both end?


Or will there be

358175
358176
358177

For front???

I have 358174 front springs and 358274 rear springs... or am I understanding something wrong?

Author:  brano [ Tue Jul 10, 2012 12:48:57 ]
Post subject:  Re: Q & A With the U.S. Racing Team

Martin uses same springs in front and in rear - 358277 XRAY PROGRESSIVE SPRINGS - MEDIUM - 3 STRIPES (2)

Author:  *HOKE* [ Wed Jul 11, 2012 00:01:07 ]
Post subject:  Re: Q & A With the U.S. Racing Team

Ok, thank you.

This cleared it to me.

Author:  stevetford [ Mon Jul 16, 2012 18:53:05 ]
Post subject:  Josh Wheeler

Hello Josh, first off great job at the Futaba challenge in St Louis. This was my first visit to the track and first time getting to watch pro drivers show us little guys how its done. This was also the first time getting to see the XB9 in person (main reason I made the trip to this track). I tried to talk with you several times to ask some questions about the XB9 in comparison to my 808 but you seemed busy all weekend. Anyways, I am going to be purchasing a XB9 buy the end of the week and wanted to know if you would be posting any of your setup sheets from the race this weekend. Thanks for your time and again, great job this weekend by you and all the other Xray drivers.

Author:  Dos Andos [ Tue Jul 17, 2012 13:05:33 ]
Post subject:  Re: Q & A With the U.S. Racing Team

Dos Andos wrote:
Hi all,
Is there any chance we could have the setup sheets for both the XB9 and XT8 from Josh Wheeler at the recent roar nationals?
Thanks in advance...


Any chance guys?

Author:  brano [ Wed Jul 18, 2012 07:02:03 ]
Post subject:  Re: Q & A With the U.S. Racing Team

I have contacted Josh and I am sure he will post them soon.

Author:  Arushmen [ Tue Dec 11, 2012 20:50:30 ]
Post subject:  Hi, the end is coming

Hi, the 2012 is almost over, I have been thinking that its time to say Thanks

Thanks for the XB9, make me better and faster driver.
Thanks, for all you help in this forum.
Thanks for this amazing 2012 season.

I hope the best for all Xray team, and Merry Christmas for everybody

Thanks a lot

Author:  Jason Branham [ Mon Feb 18, 2013 22:08:35 ]
Post subject:  Re: Q & A With the U.S. Racing Team

Hey guys, just letting you know that I'm back and happy to be back with Xray!

In saying so, I will be here and will do my best to answer questions as I did before to help anyone out with their Xray rides!

As I'm getting familiar with my XB9, which should not take long, I would also like to hear your feed back and experiences with yours. I am also awaiting the 2013 and I'm excited to see what happens and how the XB9 will be improved. I'm really liking the XB9 so far!

Author:  Robin Frischkopf [ Tue Feb 19, 2013 01:05:10 ]
Post subject:  Re: Q & A With the U.S. Racing Team

Welcome back JB! Also saw on RCTech that Rocco is rocking the XB9 too. Very nice! :D

Author:  Jason Branham [ Tue Feb 19, 2013 05:02:50 ]
Post subject:  Re: Q & A With the U.S. Racing Team

Robin Frischkopf wrote:
Welcome back JB! Also saw on RCTech that Rocco is rocking the XB9 too. Very nice! :D



Thanks Robin! Good to hear from you. Yes we get to put up with him from time to time again but it's been fun.

Author:  speed metal [ Tue Feb 19, 2013 18:29:44 ]
Post subject:  Re: Q & A With the U.S. Racing Team

Jason Branham wrote:
Hey guys, just letting you know that I'm back and happy to be back with Xray!

In saying so, I will be here and will do my best to answer questions as I did before to help anyone out with their Xray rides!

As I'm getting familiar with my XB9, which should not take long, I would also like to hear your feed back and experiences with yours. I am also awaiting the 2013 and I'm excited to see what happens and how the XB9 will be improved. I'm really liking the XB9 so far!

Great news!!!! Welcome back to the XRay fold Jason!!

Page 10 of 10 All times are UTC + 2 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/