XRAY - Model racing cars
http://forum.teamxray.com/

XB8 ---Buggy General Forum---
http://forum.teamxray.com/viewtopic.php?f=9&t=18543
Page 1 of 3

Author:  brano [ Tue Jan 28, 2014 06:48:35 ]
Post subject:  XB8 ---Buggy General Forum---

The all-new XRAY XB8 is released at here.

Author:  dergeorg [ Tue Jan 28, 2014 14:43:32 ]
Post subject:  Re: XB8 ---Buggy General Forum---

Hy. I want to know if it is possible to take the complete new xb8 front pivot ball suspension and put it on an xb9e!?

Author:  brano [ Wed Jan 29, 2014 06:52:47 ]
Post subject:  Re: XB8 ---Buggy General Forum---

Yes, theoretically this can be done.

Author:  dergeorg [ Wed Jan 29, 2014 22:20:17 ]
Post subject:  Re: XB8 ---Buggy General Forum---

Ok. Do you know if the front shock tower from the xb08 (352096)will fit on the diff housing (352004) from the xb9e? Because to change everything will be to expensive!!

Author:  brano [ Thu Jan 30, 2014 06:54:29 ]
Post subject:  Re: XB8 ---Buggy General Forum---

Yes, the #352096 shoch tower will fit on the #352004 diff housing.

Author:  dergeorg [ Thu Jan 30, 2014 07:44:23 ]
Post subject:  Re: XB8 ---Buggy General Forum---

OK thank you for the information. Maybe i will "upgrade" my xb9e to an xb8/9e :lol:

Author:  ykc [ Wed Feb 19, 2014 04:22:43 ]
Post subject:  Re: XB8 ---Buggy General Forum---

Hi,

May I know what parts are needed for xb8 2014 to be converted into electric power?

Thanks

Author:  dgrobe2112 [ Fri Feb 21, 2014 18:16:40 ]
Post subject:  Re: XB8 ---Buggy General Forum---

the same parts for the xb9e,

336000 receiver case
358783 motor mount plate
354053 diff plate
356118 receiver top plate
356194 mount for receiver box
356195 battery plate holder
358782 motor mount
351155 side guards
356151 battery tray

Author:  ykc [ Sat Feb 22, 2014 02:04:59 ]
Post subject:  Re: XB8 ---Buggy General Forum---

dgrobe2112 wrote:
the same parts for the xb9e,

336000 receiver case
358783 motor mount plate
354053 diff plate
356118 receiver top plate
356194 mount for receiver box
356195 battery plate holder
358782 motor mount
351155 side guards
356151 battery tray


Thanks a lot.

Author:  underway [ Tue Feb 25, 2014 23:47:22 ]
Post subject:  Re: XB8 ---Buggy General Forum---

What pistons come stock with the XB8?

Author:  dgrobe2112 [ Tue Feb 25, 2014 23:58:17 ]
Post subject:  Re: XB8 ---Buggy General Forum---

it comes with 6 different pistons
6x1.2
6x1.3
6x1.4
8x1.2
8x1.3
10x1.1

Author:  ykc [ Tue Mar 04, 2014 11:06:37 ]
Post subject:  Re: XB8 ---Buggy General Forum---

dgrobe2112 wrote:
the same parts for the xb9e,

336000 receiver case
358783 motor mount plate
354053 diff plate
356118 receiver top plate
356194 mount for receiver box
356195 battery plate holder
358782 motor mount
351155 side guards
356151 battery tray


Does the side guards fit xb8 2014 chasis? Has anyone try it.

Author:  ykc [ Tue Mar 04, 2014 11:08:15 ]
Post subject:  Re: XB8 ---Buggy General Forum---

And also one more question..

Does 34mm clutchwheel fit nicely and work nicely on the xb8 2014? I am planning to use Reds Racing clutch system and found out all their clutch is 34mm.

Thanks in advance

Author:  vdsracing [ Tue Mar 04, 2014 13:36:51 ]
Post subject:  Re: XB8 ---Buggy General Forum---

Has anyone tried to use the stock plastic servo horn with the servo saver spring preloaded to the stock settings?
I had 3 worn steering servo horns (savox servo - F horn) with stock setting, then I loosened the preload a little bit and
it seemd to be ok for 4-5 tanks but then the same thing happend. I think I will set it to minimum preload and use a metal servo horn
to solve this issue. There were two cars having the same problem at the track.
Apart from that, the car is awesome as expected.!

Author:  Robin Frischkopf [ Tue Mar 04, 2014 17:04:46 ]
Post subject:  Re: XB8 ---Buggy General Forum---

I think with today's strong servos and grippy tyres an aluminium servo horn is a must. The Hudy horns are just perfect for the job.

Author:  dgrobe2112 [ Tue Mar 04, 2014 17:26:13 ]
Post subject:  Re: XB8 ---Buggy General Forum---

definitly aluminum servo horn..

Author:  vdsracing [ Tue Mar 04, 2014 18:53:12 ]
Post subject:  Re: XB8 ---Buggy General Forum---

Ok, I will install an alu servo horn but I was using the stock plastic servo horn for 5 years on the 808 with no problems.The servo saver spring of the 808 was a lot softer than the xb8's one.Anyway, thanks a lot.

Author:  ykc [ Wed Mar 05, 2014 01:44:31 ]
Post subject:  Re: XB8 ---Buggy General Forum---

ykc wrote:
dgrobe2112 wrote:
the same parts for the xb9e,

336000 receiver case
358783 motor mount plate
354053 diff plate
356118 receiver top plate
356194 mount for receiver box
356195 battery plate holder
358782 motor mount
351155 side guards
356151 battery tray


Does the side guards fit xb8 2014 chasis? Has anyone try it.


Any ideas?

Author:  ykc [ Wed Mar 05, 2014 01:45:14 ]
Post subject:  Re: XB8 ---Buggy General Forum---

ykc wrote:
And also one more question..

Does 34mm clutchwheel fit nicely and work nicely on the xb8 2014? I am planning to use Reds Racing clutch system and found out all their clutch is 34mm.

Thanks in advance


This too..

Author:  dgrobe2112 [ Wed Mar 05, 2014 01:46:02 ]
Post subject:  Re: XB8 ---Buggy General Forum---

The left ebuggy guard does. The right one doesn't.

Page 1 of 3 All times are UTC + 2 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/