XRAY - Model racing cars

It is currently Sat Feb 17, 2018 23:06:02

All times are UTC + 2 hours




Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: XB8 - New to offroad - Assistence
PostPosted: Tue Dec 09, 2014 10:50:02 
Offline

Joined: Tue Dec 09, 2014 10:36:06
Posts: 1
Hi, I am having a few issues that need help with while building my first XB8

1. The rear arms are binding once fully assembled? My solution would be to sand the 2mm shims down to 1.8mm to free this up. ( arms are free if I loosen the mounting screws 1/4 turn)

2. Servo saver - Manual states to have 4-5mm of the thread sticking out the top once you thread the top on and tighten down the spring, The maximum I can get is 2.5mm down and it is extremely tight already that I would need pliers to tighten it further. Is this correct as I have checked everything correctly installed. Can I leave it at 2.5mm and test once the car is on the track?

Thanks
Deon


Top
 Profile  
 
 Post subject: Re: XB8 - New to offroad - Assistence
PostPosted: Tue Dec 09, 2014 23:01:42 
Offline

Joined: Mon Oct 11, 2010 00:02:27
Posts: 29
i run my servo saver at 2mm on high grip track and its fine,5mm broke servo for me,
hinge pins should be ok with screws 1/4 turn loose just make shore the pin does not bind
in the arm as they are tight as new.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC + 2 hours


Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group