XRAY - Model racing cars
http://forum.teamxray.com/

XT8 17 questions
http://forum.teamxray.com/viewtopic.php?f=9&t=19549
Page 1 of 1

Author:  Raddog [ Sat Jun 10, 2017 03:31:36 ]
Post subject:  XT8 17 questions

I am very interested in this Truggy, I see that it does not come with a body and lists one on the option parts list. The part number on the option list is for the old XT9 body which is not the body shown in the release, so I'm wondering if I got the XT8 what part number is for the body shown. I also was hoping someone can tell what the Wheel offset is for the XT8 17.

Author:  Martin Bayer [ Mon Jun 19, 2017 08:11:48 ]
Post subject:  Re: XT8 17 questions

Hello
We use Pro-Line body https://www.prolineracing.com/bodies/enforcer-d8t
Wheels https://www.prolineracing.com/1-8-truck-wheels

Author:  Raddog [ Tue Jun 20, 2017 03:38:59 ]
Post subject:  Re: XT8 17 questions

Thank you for the information, very much appreciated. I am looking forward to getting one when they are released

Author:  IkesInk [ Thu Sep 21, 2017 20:41:58 ]
Post subject:  Re: XT8 17 questions

Hello Martin, hope you are well and are able to shed some light onto my question please sir, I currently have issues with the XT8 17 C hubs breaking all the time, replaced them twice now, not sure what the issue is as I don't have to much steering throw and I haven't had any big crashes. I have noticed a few of the team drivers using alloy hubs and knuckles for this truggy, can you please let me know if these will be available to purchase anytime and if so when and the part numbers if possible, really appreciate your time and support, many thanks Paul

Attachments:
download.jpg
download.jpg [ 140.23 KiB | Viewed 555 times ]

Author:  Martin Bayer [ Fri Sep 22, 2017 07:08:54 ]
Post subject:  Re: XT8 17 questions

Hello

We are currently working on option alu steering hubs and c-hub. I hope to be done soon.
Can you send me picture where you keep breaking current steering?

Author:  IkesInk [ Sat Oct 14, 2017 08:21:15 ]
Post subject:  Re: XT8 17 questions

Yeah sure Martin, think we spoke on Facebook about this, is there anything I maybe doing wrong as you said this is strangely unheard of, I've had to resort to running Kyosho MP9 Alloy upfront for now until these items are available from Xray as it is pointless replacing composite items leading up to the release of the alloy. If you have any ideas of what could be causing this failure then I will be willing to purchase another set of composite hubs to see if we can get this resolved Martin. Many thanks once again

best regards

Paul

Attachments:
cracked c hub.jpg
cracked c hub.jpg [ 59.67 KiB | Viewed 497 times ]

Author:  Martin Bayer [ Wed Oct 25, 2017 07:05:55 ]
Post subject:  Re: XT8 17 questions

Try to contact Gord Tessmann <gordt@rcamerica.com>

They run XT8 most, they will help you.

Author:  IkesInk [ Wed Nov 01, 2017 00:55:50 ]
Post subject:  Re: XT8 17 questions

many thanks Martin, I will get in touch with him and let you know the outcome, many thanks for your time

Page 1 of 1 All times are UTC + 2 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/