XRAY - Model racing cars
http://forum.teamxray.com/

XB8 '17 Manual Questions
http://forum.teamxray.com/viewtopic.php?f=9&t=19561
Page 1 of 1

Author:  SundayDriver [ Fri Jul 21, 2017 22:19:56 ]
Post subject:  XB8 '17 Manual Questions

Hey team

New to RC Kits (normally buy R2R) and just picked up the XB8E '17 kit and i have a couple of questions.

    -It says to use hudy ball-bearing grease on the ball bearings. Do i put the grease on the inside circle?
    -It says to apply oil from the inside of the CVD boot to prevent breakage. But it doesn't say which oil to use?
    -Same question for the O-Ring/shockrod says to use oil on them but doesn't say which.

Am i missing something?

Author:  Martin Bayer [ Wed Sep 06, 2017 09:38:01 ]
Post subject:  Re: XB8 '17 Manual Questions

Hello

Using grease for bearings is better. You increase live time of bearings.
You need graphite grease or joint grease. Both Hudy.
Just use shock oil. It´s fine

Author:  ichy [ Wed May 02, 2018 21:36:29 ]
Post subject:  Re: XB8 '17 Manual Questions

Hello guys,

i'm not sure to understand , when we just buy the vehicule, must we open bearing to put some grease inside or not ? thanks

Author:  ricox [ Fri Oct 19, 2018 09:51:28 ]
Post subject:  Re: XB8 '17 Manual Questions

Hello,
I asked teh same thing to my reseller, he said NO, indication seems to be intended as maintenance purpose.
After using the cars, is better to clean and lubrificate ball bearing with oil.

Page 1 of 1 All times are UTC + 2 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/