XRAY - Model racing cars

It is currently Thu Oct 17, 2019 10:27:15

All times are UTC + 2 hours




Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: droop screws
PostPosted: Thu May 24, 2018 20:19:33 
Offline

Joined: Thu Mar 22, 2012 03:57:52
Posts: 3
Hi, I have a new XT8 truggy and would like to set the droop screws to the numbers in the basic setup page. I have the 30mm setup blocks and the ride height guage o to -13 hudy. The rear seems to be no problem , but the front when assembled has such a kickup(angle) that the ride height guage isn`t high enough. It calls for -10 in rear and -7 in front. The setup blocks are in the right spot. What am I doing wrong. I checked on the site and they are the right setup pieces for a truggy/buggy. Hope some one can help. Thanks :?


Top
 Profile  
 
 Post subject: Re: droop screws
PostPosted: Thu Dec 27, 2018 20:19:23 
Offline

Joined: Thu Dec 27, 2018 20:17:11
Posts: 4
fox947 wrote:
Hi, I have a new XT8 truggy and would like to set the droop screws to the numbers in the basic setup page. I have the 30mm setup blocks and the ride height guage o to -13 hudy. The rear seems to be no problem , but the front when assembled has such a kickup(angle) that the KissAnime GroupMe Mobdro ride height guage isn`t high enough. It calls for -10 in rear and -7 in front. The setup blocks are in the right spot. What am I doing wrong. I checked on the site and they are the right setup pieces for a truggy/buggy. Hope some one can help. Thanks :?

I also have the similar problem but didnt this could be a solution but now i also need those for my XT8. Hope someone knows how to get them.

Thanks in advance.
Regards,
Shane.


Top
 Profile  
 
 Post subject: Re: droop screws
PostPosted: Wed Jul 31, 2019 07:12:53 
Offline

Joined: Wed Jul 31, 2019 07:12:16
Posts: 1
mobdro
https://mobdroapp.fun/


Top
 Profile  
 
 Post subject: Re: droop screws
PostPosted: Tue Aug 06, 2019 10:27:42 
Offline

Joined: Tue Aug 06, 2019 10:23:08
Posts: 2
fox947 wrote:
Hi, I have a new XT8 truggy and would like to set the droop screws to the numbers in the basic setup page. I have the 30mm setup blocks and the ride height guage o to -13 hudy. The rear seems to be no problem , but the front when assembled has such a kickup(angle) that the ride height guage isn`t high enough. It calls driving directions for -10 in rear and -7 in front. The setup blocks are in the right spot. What am I doing wrong. I checked on the site and they are the right setup pieces for a truggy/buggy. Hope some one can help. Thanks :?

I couldn't figure out how to resolve this.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC + 2 hours


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group