XRAY - Model racing cars

It is currently Wed Nov 22, 2017 03:56:54

All times are UTC + 2 hours




Post new topic Reply to topic  [ 24 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: Xray 1/10 Formula One Car
PostPosted: Mon Mar 17, 2014 20:30:30 
Offline

Joined: Mon Mar 17, 2014 20:17:23
Posts: 2
Xray has been the car of choice by many drivers in Texas since RCAmerica is just up the road. Also rubber tire 1/10 scale Formula One racing has been growing here in Dallas and in Houston, Texas. I have seen pictures of Jan Ratheisky and his ETS winning Xray 1/10 Formula One Car and I decided that I have to race one. When will the Xray F-1 be available to buy?


Top
 Profile  
 
 Post subject: Re: Xray 1/10 Formula One Car
PostPosted: Fri Oct 31, 2014 21:19:25 
Offline

Joined: Tue Jan 29, 2013 20:43:38
Posts: 6
Any news reguarding F1 ???


Top
 Profile  
 
 Post subject: Re: Xray 1/10 Formula One Car
PostPosted: Mon Nov 03, 2014 08:40:13 
Offline
User avatar

Joined: Fri Sep 10, 2004 05:52:13
Posts: 1344
Location: Trencin, Slovakia
XRAY is hard working on the Formula car so you can expect soon more news.


Top
 Profile  
 
 Post subject: Re: Xray 1/10 Formula One Car
PostPosted: Fri Nov 28, 2014 22:47:44 
Offline

Joined: Fri May 12, 2006 15:35:09
Posts: 1
Location: ITALY
Is time to present it?


Top
 Profile  
 
 Post subject: Re: Xray 1/10 Formula One Car
PostPosted: Mon Dec 01, 2014 06:47:42 
Offline
User avatar

Joined: Fri Sep 10, 2004 05:52:13
Posts: 1344
Location: Trencin, Slovakia
More info will be posted this week.


Top
 Profile  
 
 Post subject: Re: Xray 1/10 Formula One Car
PostPosted: Sun Dec 14, 2014 03:37:14 
Offline

Joined: Mon Mar 17, 2014 20:17:23
Posts: 2
Finally, I love the look of the new X1 box.
Image


Top
 Profile  
 
 Post subject: Re: Xray 1/10 Formula One Car
PostPosted: Wed Dec 17, 2014 07:04:18 
Offline
User avatar

Joined: Fri Sep 10, 2004 05:52:13
Posts: 1344
Location: Trencin, Slovakia
The new 1/10 formula race car XRAY X1 designed and manufactured by XRAY is now disclosed in detailed presentation at www.teamxray.com/X1


Top
 Profile  
 
 Post subject: Re: Xray 1/10 Formula One Car
PostPosted: Fri Dec 19, 2014 06:28:17 
Offline

Joined: Fri Jan 03, 2014 08:40:09
Posts: 47
We got the car yesterday in denmark. Time to set a new standard for formula 1


Top
 Profile  
 
 Post subject: Re: Xray 1/10 Formula One Car
PostPosted: Sat Dec 20, 2014 22:37:12 
Offline

Joined: Sat Dec 20, 2014 22:25:38
Posts: 3
Hello Everybody !

I had my First Rollout on Carpat today ....
Change a little setup:
1. Change Caster from 9 deg to 6 deg
2.Change Chamber from 2 deg to 1 deg ....this was easier for me to drive

in the rear i change the oil of the Rollshock from 600 to 3000

Car runs beautiful with this modification ..but my Problem is still the Traction !!! It has a lot of Wheelspin out of the Corner ...

So if anyone Knows some tips to get this ugly whellspin get into Controll pleas give me an tip .

Best Regards from Austria

Zucki


Top
 Profile  
 
 Post subject: Re: Xray 1/10 Formula One Car
PostPosted: Sun Dec 21, 2014 10:06:54 
Offline

Joined: Sun Dec 21, 2014 09:55:09
Posts: 1
Hello

I have the same problem with the wheel spin.

Best Regards from Austria


Top
 Profile  
 
 Post subject: Re: Xray 1/10 Formula One Car
PostPosted: Tue Dec 23, 2014 00:56:45 
Offline

Joined: Sat Dec 20, 2014 22:25:38
Posts: 3
Hy Maio !

first ich changed my Clearance from the standard Setup to lower.
so now its 3mm front and 3,5 in middle and rear .....

hopefully traction will be better ...i tried this setting next time ..

:D


Top
 Profile  
 
 Post subject: Re: Xray 1/10 Formula One Car
PostPosted: Fri Dec 26, 2014 14:36:27 
Offline

Joined: Fri Dec 26, 2014 14:20:27
Posts: 9
Hello,i am assuming it happens when you go on the throttle coming out of a corner, tires rubber or foam?
maybe go back to the 600 in roll shock, i think in this roll shock 3000 is much to thick.
It will not have any movement at all.
it would lift the inner wheel only more with 3000.
You could tighten up the diff a little bit.
Maybe some more tension on the side springs.
Maybe a firmer center spring.
All this will make your car more responsive, so maybe a little more difficult to drive.
Do not do this all at once, one thing at the time.
You could also try to go on the throttle less aggressive. :lol: :lol:
regards from the Netherlands, Joop.

P.S. my X1 is nearly finished. :mrgreen:


Top
 Profile  
 
 Post subject: Re: Xray 1/10 Formula One Car
PostPosted: Sun Jan 04, 2015 02:58:13 
Offline

Joined: Tue Sep 30, 2014 05:41:15
Posts: 2
also a little more front droop should let it transfer more weight to the rear on exit


Top
 Profile  
 
 Post subject: Re: Xray 1/10 Formula One Car
PostPosted: Sun Jan 04, 2015 13:05:25 
Offline

Joined: Fri Dec 26, 2014 14:20:27
Posts: 9
According the specs, front droop is not adjustable.

Front Suspension:
Strong, simple, fully adjustable, yet smart and ultra-efficient front suspension
High-grade graphite lower & upper suspension arms and arm mount plate
Tiny, strong composite pivot balls for smooth, bind-free operation.
Adjustable front caster via eccentric bushings for front upper plate: 3°, 6°, 9°, and 12°
Adjustable front camber via eccentric bushings for front upper arms: 1.0°, 1.5°, 2.0°, and 2.5°
Adjustable front upper & lower roll centers via included shims
Adjustable front track-width adjustment via included wheel axle shims.


Top
 Profile  
 
 Post subject: Re: Xray 1/10 Formula One Car
PostPosted: Sun Jan 04, 2015 19:35:03 
Offline

Joined: Tue Sep 30, 2014 05:41:15
Posts: 2
I just looked at an exploded parts view. If you add or remove shim number 372290, you should be able to change front droop? Unless im seeing something wrong. I dont have the car (yet, its on the way) but from the picture that looks to be how you would do it


Top
 Profile  
 
 Post subject: Re: Xray 1/10 Formula One Car
PostPosted: Mon Jan 05, 2015 11:49:09 
Offline

Joined: Fri Dec 26, 2014 14:20:27
Posts: 9
Hello, that could be an option, but it all depends on the ride height you like to get.
If you have to remove all the spacers below the steering knuckle, you end up with only the sag of the spring used.


Top
 Profile  
 
 Post subject: Re: Xray 1/10 Formula One Car
PostPosted: Wed Jan 07, 2015 23:19:46 
Offline
team driver
User avatar

Joined: Mon Feb 10, 2014 11:46:05
Posts: 15
Hello guys,

the pictuere below shows my last used setup.

Ane questions ? Just let me know,

greetings

Jan


Attachments:
File comment: Setup
setup.jpg
setup.jpg [ 125.81 KiB | Viewed 9654 times ]
Top
 Profile  
 
 Post subject: Re: Xray 1/10 Formula One Car
PostPosted: Thu Jan 08, 2015 12:02:14 
Offline

Joined: Sat Jun 18, 2005 12:48:40
Posts: 1333
Location: Windsor, UK
What changes would you make for lower grip track?


Top
 Profile  
 
 Post subject: Re: Xray 1/10 Formula One Car
PostPosted: Thu Jan 08, 2015 21:21:51 
Offline

Joined: Tue Sep 28, 2010 22:51:05
Posts: 74
I love this New car,the only one problem is to do the same height rear and front.
Front height is highest....

Pigio


Top
 Profile  
 
 Post subject: Re: Xray 1/10 Formula One Car
PostPosted: Mon Jan 12, 2015 17:52:58 
Offline
team driver
User avatar

Joined: Mon Feb 10, 2014 11:46:05
Posts: 15
You have do add shims under the posts in front to adjust the ride hight.

For low traction you should try to run less caster, longer center shock, less downstopp, less Ackerman,
Softer oil in shocks and Soft Rear Diff wich is a bit open.

greetings

Jan

I forget you have also the option to rise the hight of rear wing wich affekts a lot


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 24 posts ]  Go to page 1, 2  Next

All times are UTC + 2 hours


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group